|
• Useful table surface: 1300 × 310 mm
• Table travel: 1420 mm (56")
• Max. working length: 1200 mm (47 ¼")
• Max. workpiece width: 405 mm (16")
• Min. - Max. workpiece height: 115 - 800 mm (4½" - 31½")
• Milling plate diameter: 405 mm (16")
• Variable Spindle speed: 500 - 1350 RPM
• Variable table feed speed: 0 - 1500 mm/min.
• Spindle Motor: 4,2 kW (5,6 HP)
• Head rapid feed motor: 0,18 kW (0,24 HP)
• Table Drive Motor : 0,75 kW (1 HP)
• Total power: 5,0 kW (6,85 HP)
• Voltage – Hz – phases: 400V - 50Hz - 3ph / 230V - 60Hz - 3ph
• Machine Dimensions (W×D×H): 2600×1250×2050 mm (102×49×80")
• Weight machine (unpacked): 1480 kg (3265 Lbs)
• Machine Shipping Weight: 1950 kg (4290 Lbs)
• Shipping Dimensions (W×D×H) Seaworthy wooden box packing: 2750×1280×2300 mm (108×50×90")
|
|
|
• Low voltage electric controls (24V)
• Ball Screw Driven Variable Speed Table
• Power Column with Ball Screw
• Motorized raise and lower of the milling head
• Variable head spindle speed with digital read-out
• 16" (405 mm) CBN / PCD Milling plate
• Manual / Auto Return / Continuous working cycle
• Depth Indicator Assembly complete of dial gauge
• 3/8 (9,52mm) Tool holder Cartridge
• 3/8" CBN insert
• Swing arm control panel
• Safety guard with polycarbonate shield
• Automatic Central Lubrication System
• Pair of parallel supports
• Large + Small clamps (2+2 pcs.)
• Oil for slides (1 lt.)
• Wrench set
• Instruction manual
• Painted with standard grey colours RAL 7040 and RAL 7015.
|
|
